MAX11040GUU+T【PDF 18/35 页】IC ADC 24BIT 4CH 38-TSSOP

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录2007

14页 15页 16页 17页 [18页]19页 20页 21页 22页

MAX11040K/MAX11060

24-/16-Bit, 4-Channel, Simultaneous-Sampling,

Cascadable, Sigma-Delta ADCs

Maxim Integrated

MAX11040K

MAX11060

SYNC

SCLK

DIN

CASCIN

DRDYIN

DRDYOUT

FAULT

OVRFLW

DOUT

XIN

DEVICE n+1

DEVICE 0

DEVICE n

MAX11040K

MAX11060

SYNC

SCLK

DIN

CASCIN

DRDYIN

CASCOUT

DRDYOUT

FAULT

OVRFLW

DOUT

XIN

XOUT CLKOUT

MAX11040K

MAX11060

SYNC

SCLK

DIN

CASCIN

DRDYIN

CASCOUT

DRDYOUT

FAULT

OVRFLW

DOUT

XIN

DSP OR

MICROCONTROLLER

CASCADE UP TO 8 DEVICES

Figure 13. Daisy- Chaining Multiple Devices

Multiple Device Connection

Daisy chain up to eight devices for applications that

require up to 32 simultaneously sampled inputs over a

single SPI-/DSP-compatible serial interface with a single

chip-select signal, and single interface commands that

apply to all devices in the chain. The eight devices effec-

tively operate as one device.

There are two aspects to cascading multiple devices:

the digital interface and the mechanism for keeping

multiple devices sampling simultaneously.

There are many configurations for connecting multiple

devices; one is described in the next section, others

are described in the

Synchronizing Multiple Devices

section within the

Applications Information section.

Multiple Device Digital Interface

Figure 13 shows the most common way to daisy chain

the digital interface of multiple devices.

SPI bus arbitration is performed using CASCIN and

CASCOUT. A falling edge at the CASCIN input of device

n, which is driven by the CASCOUT of device n-1,

allows device n to take over the SPI bus until all expect-

ed data is written or read; at this point, device n pulls its

CASCOUT output low. Similarly, CASCOUT of device n

drives CASCIN of device n+1. Figures 12 and 14 show

read operations, including CASCIN and CASCOUT tim-

ings, for two cascaded devices and eight cascaded

devices, respectively. The operation described above

applies to all register operations except for writes to the

Data-Rate Control register. A fixed 16-bit word is written

to the Data-Rate Control registers of all devices in the

chain, independent of the number of cascaded devices

(see Figure 15). Reading from the Data-Rate Control

Connecting the open-drain OVRFLW output of all

devices together creates one signal that summarizes

the overflow information of all devices. This is also true

of the FAULT output. Connecting together these out-

puts from multiple devices has the effect of a “wire

NOR.” Any device that has an active condition on these

outputs is allowed to pull the line low.

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式